SECTION 22.1-275. Protective eye devices  

Every student and teacher in any school or institution of higher education shall be required to wear industrial quality eye protective devices while participating in any of the following courses or laboratories:

1. Career and technical education shops or laboratories involving experience with:

a. Hot molten metals,

b. Milling, sawing, turning, shaping, cutting, grinding, or stamping of any solid materials,

c. Heat treatment, tempering, or kiln firing of any metal or other materials,

d. Gas or electric arc welding,

e. Repair of any vehicle, or

f. Caustic or explosive materials;

2. Chemical or combined chemical-physical laboratories involving caustic or explosive chemicals or hot liquids or solids.

The governing board or authority of any public or private school or the governing board of each institution of higher education shall furnish the eye protective devices prescribed in this section free of charge or at cost to the students and teachers of the school participating in such courses or laboratories; however, such devices may be furnished by parents or guardians of such students. Eye protective devices shall be furnished to all visitors to such courses.

"Industrial quality eye protective devices," as used in this section, means devices providing side protection and meeting the standards of the American Standards Association Safety Code for Head, Eye, and Respiratory Protection, Z2.1-1959, promulgated by the American Standards Association, Inc.

Code 1950, § 22-10.2; 1966, c. 69; 1980, c. 559; 2001, c. 483 .